Nickel Strip Wholesaler, Stockist & Distributor in India

Ramani Steel House is a nickel strip manufacturer in Mumbai that also sells as a wholesaler, stockist and distributor. Manufacturing is the core of the business, and because the strip is made and slit in-house, the same 99.8% pure nickel is available in small lots: orders start at 5 kg, which suits small battery manufacturers, pack assemblers and traders as well as volume buyers.

Why buy from a manufacturer that also wholesales

A trader or distributor usually buys from a mill and resells, so the buyer is two steps from the material and the certificate. Buying from the manufacturer removes that step. The strip comes from the same production and slitting lines that supply volume orders, a material test certificate is available on request, and a question about thickness tolerance or weldability goes to the people who made the strip.

Small lots for small battery manufacturers

The minimum order is 5 kg. That is enough strip for a pack builder assembling a few hundred cells, a workshop building e-bike or power-tool packs, or a trader stocking a few common sizes, without committing to a mill-sized order. Pricing is quoted per kilogram.

What is held in stock

Common thicknesses in pure nickel, chiefly 0.15 mm and 0.20 mm, are held as coil and slit to the width you need, so an ordinary requirement does not wait on a mill run. Stock of a particular width is confirmed at quotation. Despatch is typically within 7 days, PAN India.

New designs made to your drawing

The listed sizes are only the most requested ones. If your pack needs a different thickness, width, pitch or hole pattern, it is made to your drawing, and tooling is developed for unique battery pack layouts. Send the drawing or cell arrangement with the enquiry and the quotation is made against it.

At a glance

Manufacturer first, also stockist, wholesaler and distributor
Minimum order 5 kg, despatch in about 7 days
Nickel purity 99.8%, with material test certificates on request
Thickness 0.10, 0.12, 0.15, 0.20, 0.25, 0.30 mm standard, other thicknesses to order
Width 2–50 mm, cut to your drawing
For 14500, 18650, 21700, 26650, 32650, 32700, 4680 cells and custom pack layouts
Pure nickel and nickel-plated steel, in strip, coil and busbar form
Custom slitting, pitch and hole patterns to your cell layout

Products

Ni 18650 2P H-Type Fuse Nickel Strip — Thickness: 0.15mm
Ni 18650 2P H-Type Nickel Strip — Thickness: 0.15mm
Ni 21700 2P H-Type Nickel Strip — Thickness: 0.20mm
Ni Custom Cut Nickel Strip — 0.15 mm, cut to pattern — Thickness: 0.15mm
Ni Custom Nickel Strip — 0.20 mm x 40 mm, 34 mm CD — Thickness: 0.20mm, Width: 40mm, 34mm CD, Length: Strip
Plain Nickel Strips — Thickness: 0.1 mm to 1.0 mm

Frequently asked questions

What is the minimum order for nickel strip?

5 kg. The same material, certificates and slitting apply at 5 kg as at bulk quantities.

Are you a nickel strip manufacturer or a distributor?

Both. Manufacturing in Mumbai is the primary business, and the company also sells as a stockist, wholesaler, trader and distributor, so small buyers get manufacturer-direct material without a mill-sized order.

Can traders and distributors buy nickel strip from you for resale?

Yes. Traders and distributors buy by the kilogram in the common thicknesses and widths. Send the sizes and quantities you stock and a price is quoted per kilogram.

Do you make nickel strip in sizes that are not listed?

Yes. Thickness, width, pitch and hole pattern are made to your drawing, and tooling is developed for new battery pack designs. The minimum order still applies.

Also supplying

Contact

Ramani Steel House, 65/73, C.P. Tank Road, Mumbai, Maharashtra 400004, India

Email: [email protected] / [email protected]

Phone: +91 83697 24730 / +91 80976 53930 / +91 81691 82418